Find a Solution

Designed for constant speed applications, the analog meter relay monitors amperage and air flow.

Auxiliary tanks, covers, and separators allow for pick-up of excessive volumes of materials and liquids. Are typically paired with 30 or 55 Gallon Drums.

A Hoffman & Lamson oferece uma ampla linha de mangueiras de vácuo que devem atender a todas as suas demandas operacionais.

A Hoffman & Lamson oferece ferramentas de piso comerciais e industriais ideais para a limpeza geral e aplicação de vácuo em piso com pó mais leve.

Inlet Flow: to 41,300 m3/h (to 70,100 CFM) Inlet Sizes: Above 14 in. (35 cm.)

Available only as a secondary collector, the Hoffco-Pulse dislodges accumulated dust without disrupting service.

Inflet Flow: to 400 CFM (to 680 m³/h)
Vacuum Range: to 10 inHg (to 340 mbar)

Half Flow Series - Inlet Flow: to 450 CFM (to 760 m3/h)Full Flow Series - Inlet Flow: to 900 CFM (to 1,500 m3/h)

Half Flow Series - Inlet Flow: to 450 CFM (to 760 m3/h)Full Flow Series - Inlet Flow: to 900 CFM (to 1,500 m3/h)

Capacity up to 6,121 cfm

Inlet Flow: to 1,100 m3/h (to 1,800 CFM) Inlet Sizes: Up to 5 in. (13 cm.)

Designed for wastewater system applications and is the answer to controlling more complex blower configurations.

Inlet Flow: to 10,000 m /h (to 16,900 CFM) Inlet Sizes: 5 in. to 12 in. (13 cm. to 30 cm.)

Inlet Flow: to 400 CFM (to 680 m3/h) Vacuum Range: to 10 inHg (to 340 mbar)

Advanced and configurable platform capable of monitoring various operating conditions in both constant speed and variable applications.

Automated monitoring to provide historical and real-time data for predictive maintenance.

Available with a cone bottom or a dust bucket, the S Type Primary Collector captures, separates, and filters solids directly from the piping system.

These collectors use multiple tubular dust bags to trap fine materials not captured by the primary unit. Bags are available in a variety of fabrics.

Capacity up to 6,180 cfm

Economical and task specific, Digital Control Panels are designed to protect single blowers in constant speed applications.

Inlet Flow: to 800 CFM (to 1,350 m3/h) Vacuum Range: to 10.5 inHg (to 350 mbar)

Inlet Flow: to 1,200 CFM (to 2,050 m3/h) Vacuum Range: to 8.5 inHg (to 290 mbar)

Our lightweight tubing and fittings provide efficiency and cost effective piping.

TurboClean uses reverse jet pulses from compressed air to continuously clean for trouble-free vacuum.

Designed for use in most wet pickup applications, wet collectors remove liquids from conveying air streams.