Hoffman & Lamson - A Gardner Denver Product

General Industry

General Industrial Application - Petrochemical, Hoffman & Lamson

Hoffman & Lamson products serve an ever expanding market of industrial applications. With over 100,000 installations worldwide we have the product depth and industry experience required by demanding applications.  

Durable, reliable and efficient, Hoffman & Lamson products represent the highest quality workmanship, using the finest materials and state-of-the-art machining tools. Our dedication to design and quality assures you that when you select Hoffman & Lamson for your industrial application, you are selecting the best. 

Learn more about specific industrial applications and view compatible products below. 

Multistage Centrifugal Blower/Exhausters for Industrial Applications Brochure

Air KnivesCompatible Products

An air knife is a tool used to blow off liquid or debris from products as they travel on conveyors. The knife consists
of a high intensity, uniform sheet of laminar airflow (streamline flow). Blower powered air knives have proven to reduce energy consumption by 50-75% when compared to compressed air alternatives. 

Learn more about air knives. 

Carbon BlackCompatible Products

Carbon black is produced by the reaction of oil or gas with a limited supply of combustion air at specific temperatures. The unburned carbon is collected as an extremely fine black particle. Hoffman & Lamson multistage centrifugal blowers create a high volume of air at high pressure to force air through the process to enhance combustion efficiency. The airflow also carries the carbon particulate and exhaust gases through the quench tower and into the bag filters. 

Learn more about carbon black. 

Chemical - Carbon BlackCompatible Products


Oil or gas is continually injected into a high temperature furnace where it decomposes into carbon black, which is used for tires, rubber products and pigments in inks, coatings and plastic.


Hoffman and Lamson combustion blowers help the production process of carbon black by introducing hydrocarbon fuels, such as oil or gas with high temperatures of 1,320 to 1,540 ˚C (2,400 to 2,800 ˚F). 90% of the processes in the United States are "Oil Furnace Process" and 10% are "Thermal Process". The Thermal Process uses natural gas only, whereas the Oil Furnace Process uses oil as a feedstock and natural gas as a heat source.

An aromatic hydrocarbon feedstock is heated and continually injected into the combustion zone of a gas fired, brick-lined furnace. The oil is decomposed and forms carbon black. Quench water is introduced to the gases to stop the cracking process. Now at 500 ˚C (1,000 ˚F), the gases and carbon particles pass through heat exchangers and direct water spray to further reduce the temperature to 230 ˚C (450 ˚F). Bag filters separate the carbon black from the exhaust gases.The carbon particles are pulverized and pelletized and conveyed to bulk storage for transport.

Hoffman™ and Lamson™ Products

The Hoffman or Lamson multistage centrifugal blower creates a high volume of air at a high pressure to provide forced air through the combustion process. Measured amounts of natural gas are injected into the blower's airflow. The large volumes of air and increased pressures greatly enhance combustion efficiency necessary for the decomposition to occur. Also, the airflow carries the carbon particulate and exhaust gases through the quench tower and into the bag filters.

The airflow is usually 5 - 6,000 cfm (8,500 - 10,200 m3/h) with many plants sized at 12,000 scfm (20,300 m3/h) and up. The pressure is usually around 12 psig (.83 barg). Blowers are operated at or near full load at all times. Typically, there are one or two blowers per reactor.

Coal Bed Methane RecoveryCompatible Products

Coal bed methane is emerging as a source of clean energy. Extracting the coal bed methane allows mining at greater depths while improving safety and providing higher mining output. A single Hoffman & Lamson product can work as both a pump and blower, making it ideal for coal bed methane recovery. 

Learn more about coal bed methane recovery.

Ethanol Production Compatible Products

Hoffman & Lamson products can be used in the various stages of ethanol production. 

Carbon dioxide is given off during the fermentation stage or ethanol production, and some plants collect and market the gas. To do this, the gas must be removed and stored under pressure. Hoffman & Lamson multistage centrifugal blowers are used to draw off the carbon dioxide and transport it for storage in pressurized cylinders.

To maintain a clean and safe working environment ethanol facilities use robust Hoffman & Lamson vacuum systems. Not only does this keep the receiving and storage areas clean, but it keeps the facility free of combustible dust , and compliant with OSHA regulations. 

Learn about ethanol production.

Fiberglass ManufacturingCompatible Products

In fiberglass manufacturing, batches of raw materials are prepared, then melted in a furnace. Temperatures must be precisely controlled to maintain a smooth, steady flow of molten glass. Hoffman & Lamson multistage centrifugal blowers produce a reliable feed of combustion air, to help ensure a steady and accurate melting process. 

Learn about fiberglass production.

Forced Air Oxidation in Wet FGDCompatible Products

In wet Flue Gas Desulfurization (FGD) systems, a scrubbing liquid containing an alkali reagent is used to enhance the absorption of SO2 and other acid gases. The wet FGD scrubber is designed for constant re-circulation of the reagent slurry, and is designed to operate at or near 100% capacity at all times. To maximize power production at all times, only minor variations in the flow should affect the forced oxidation blowers. To meet this demanding task, plants have trusted Hoffman & Lamson blowers. For two decades we have supplied multistage centrifugal solutions, that come with lower initial cost and superior mechanical reliability when compared to high speed single stage blowers. 

Learn more about forced air oxidation in wet flue gas desulfurization.

Froth Flotation (Ore Flotation)Compatible Products

Froth flotation, also called ore flotation when used in mining applications, is a method for physically separating
particles by having air bubbles selectively adhere to specific surfaces. The particles with attached air bubbles are carried to the surface and removed. Hoffman & Lamson multistage centrifugal blowers are custom made and designed to deliver a specific airflow and pressure, offering an efficient way to produce constant forced air with equipment known for its reliable and dependable performance. 

Learn about froth flotation. 

Landfill Gas Extraction Compatible Products

The organic waste in landfills is covered and compressed by heavy equipment, creating conditions that leads to decomposition of the organic matter, resulting in methane gas. If allowed to build up, the gas can cause explosions. If leached into the atmosphere, the gas can contribute to smog as greenhouse gases. To maintain safety and comply with environmental regulations, the gas can be flared or cleaned to pipeline quality. Hoffman & Lamson multistage centrifugal exhausters are used in both processes to draw the methane gas from the landfill. 

Learn about landfill gas extraction